Robland LX 310 Combination
Click the image for a larger picture of the Robland LX 310 Combination
I . The planer table fence can also be used with the saw as both saw and planer tables are at the same height. This increases rip cut capacity to a maximum of 600 mm.
2. The sturdy fence can be set to mitre angles up to 45 degrees and is complete with a clear scale, eccentric woodclamp and flip-over stop.
3. The sawguard raises, lowers and tilts with the blade. They both retract fully below the table simply by sliding the table insert out. All in seconds, with no tools required.
4. The large cast iron table slides on two 30 mm bars. These bars can be repositioned along the machine frame in seconds. This allows the table stroke to be ideally Positioned to suit working with the saw or spindle.
5. The long planer tables make straightening workpieces easy. Fine adjustment of the tables is also easy thanks to the large handscrews.The planer fence is very solid and tilts with positive stops at 45 and 90 degrees.
6. Up to 230 mm thicknessing capacity with precision setting and locking.The very sturdy central column and positive feed system ensure excellent results.
7. Large capacities and sturdy construction ensure maximum versatility. 80 mm bearing seats, a 30 mm diameter spindle, and 3 spindle rings (maximum diameter of 180 mm) ensure professional results. A spring loaded locking device enables quick fitting of tooling while the hood guards ensure maximum safety under all conditions. For precise easy set up fence feature micro adjustment.
8. Circular slides ensure smooth, easy movement of the worktable. Large travel capacities handle a wide variety of work.The lever handles are removed in seconds. In fact the entire mortising unit is very easy to remove. This avoids any obstruction or inconvenience when using the machine's other funtions.
For more than 25 years, Robland have been one of the world's most important woodworking machinery manufacturers. This experience is your guarantee of the quality of the Robland LX310 combination woodworker.
A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the Robland LX310 combination saw into a small panel saw with 1290 mm crosscut capacity.
A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. Change-over is achieved instantly via a selection switch on the control panel. There is an extension table on the spindle table of the Robland LX310 combination saw and also a mounting table for a power feeder. This folds away when the feeder is not required.
The optional revolving base and the wheelset make using the machine even easier. For love of wood says it all !
The jointer shares the same fence as the Table Saw and is easily
adjustable with positive stops at 45 and 90 degree angles.
Jointer tables are 1400mm long with a cutting width of 310mm. The jointer has a three knife cutter head with spring loaded knives for easy changeover.
Powered by a 3hp motor, it can take a huge 6mm cut on the thickness planer. The planer makes very high quality cuts and uses the same three knife cutter head as the jointer.
The planer will accept up to 310mm width and 230mm height. The feed speed is 6 metres per minute.
| Technical data | LX-310 | X-260 |
| PLANER | ||
| Voltage | 220-380 - Single | 220-380 - Single |
| Motors three phase | 3 x 3 HP or 4 HP | 3 x 3 HP or 4 HP |
| Motors single phase | 3 x 3 HP | 3 x 3 HP |
| Tables sizes | 310 x 1400 mm | 260 x 1400 mm |
| Max. thickness capacity | 230 mm | 230 mm |
| Feed speed | 6 m/min | 6 m/min |
| R.p.m. | 4500 | 4500 |
| Knives | 3 | 3 |
| SAW | ||
| R.p.m. | 4000 | 4000 |
| Max depth of cut at 90° | 85 mm | 85 mm |
| Max depth of cut at 45° | 55 mm | 55 mm |
| Saw table size | 800 x 445 mm | 800 x 445 mm |
| Saw diameter | 250 x 30 mm | 250 x 30 mm |
| Saw stroke LX-310 | 1290 mm | |
| Saw stroke X-310 X-260 | 960 mm | 960 mm |
| SPINDLE | ||
| R.p.m.three phase | 3000/6000 | 3000/6000 |
| R.p.m. single phase | 6000 | 6000 |
| Spindle diameter | 30 mm | 30 mm |
| Spindle capacity | 125 mm | 125 mm |
| Rise and fall | 140 mm | 140 mm |
| Sliding table size | 340 x 370 mm | 340 x 370 mm |
| MORTISER | ||
| R.p.m. | 4500 | 4500 |
| Table size | 200 x 425 mm | 200 x 425 mm |
| Stroke : cross in / out / up | 165 x 140 x 85 mm | 1 65 x 140 x 85 mm |
| Chuck capacity | 0-16 mm | 0-16 mm |
| PACKING | ||
| Weight in KGs | 400 | 350 |
| Case Sizes L x W x H | 1460 x 1120 x 1100 | 1460 x 1120 x 1100 |
|
|
||
|
Robland Woodworking Tools | Robland T120 | Robland XSD 310 | Robland LX 310 | Robland Z 3800
|